Go BottomAccessories
 | Dennis Foli
Join Date: Posts: 1 
|
2000-07-04 17705
Has anyone put any accesories on the kubota B2710 such as a cup holder, extra lights, or a radio. Let me know where and how. Thanks
Reply to |
Quote Reply |
Add PhotoAccessories
| Bird Senter
Join Date: Jun 1999 Posts: 962 
|
2000-07-05 17741
Dennis, your question is pretty general, but I have a B2710 and had the dealer install a cigarette lighter on the dash between the steering column and light switch before he delivered it. They ran a hot wire from the starter with an inline fuse. They also mounted an insulated steel canopy on the ROPS. It has a coated angle iron frame on the bottom side and then I mounted a work light (floodlight) on the rear of the canopy frame and a light (trapezoidal) on the front of the canopy frame with a toggle switch on the right side of that frame. The 2710 already has a fused lead under the seat on the right side for power for auxiliary lighting. It's wired through the ignition switch, i.e., only hot with the key on. And if you remove the two bolts holding the toolbox under the seat and take the toolbox out, you'll find a big ground bolt in the top of the transmission that the other lights are grounded to. I also mounted a tiltmeter and rear view mirror on the front of the canopy frame. I still haven't figured out a good place for a cup holder (and while I understand they have a fender mounted radio available for the B2710, I don't have any use for a radio on mine). ....
Reply to |
Quote Reply |
Add PhotoAccessories
| RCH
Join Date: Posts: 1
|
2000-07-08 17818
Here is a site,with pictures,of accessories added to a Kubota ....
Link:
Click Here
Reply to |
Quote Reply |
Add Photo
Go Top
Share This